Digital OLED Portable Fingertip Pulse Oximeter Oximetro RZ001 SPO2 Pulse Rate Oxygen Monitor Diagnostic-tool
1. Fingertip pulse oximeter:Use this oximeter to check and help keep your family healthy.
2. Beautiful shape, perfect color: Five colors to choose from: Deep space grey. sakura pink, sky blue, grass green, lavender violet.
3. Optical frequency conversion technology:Adopts LFC optical frequency digital conversion technology, greatly improves the accuracy of data collection, polishes accuracy under weak perfusion.
4. Medical standard measurement accuracy:Compared with professional medical monitors, the numerical error is very small, and it also supports real-time numerical display.
5. Can set alarm function (SPO2 PR)：The upper and lower limits of the value can be adjusted. If the set value is exceeded, the product will give an audible alarm and the screen will flash.
1. Precise measurement, comfortable use.
2. Support real-time monitoring.
3. Alarm function can be set.
Blood Oxygen Saturation:
Measurement range: 70%-99%.
Within the range of 80% – 99% + 2%.
Within the range of 70% – 79% + 3%.
No requirement below 70%
Resolution: Oxygen saturation (+1%)
Pulse Rate: Measurement Range: 30BPM-240BPM
Measurement accuracy: +1 BPM or +1% of measurement value (larger value)
1 x Fingertip pulse oximeter
1 x Manual
1 x Cable
1 x Storage Bag
How to use it:
Turn on the pulse oximeter by firmly pressing the power button. The screen should light up almost instantly.
Place the sensor — the part that opens and closes like a clothespin — on any finger, with the sensor screen above the fingernail. If the sensor doesn’t have a screen, run the cable along the back of the finger or hand. Don’t use the thumb because readings are less reliable than finger readings.
Wait quietly while the pulse oximeter acquires a signal. This may take 10 seconds or more, depending on the device and the conditions. Excessive movement during measurement can decrease the accuracy of the result or may cause an error message.
Look at the display to see the heart rate, usually indicated with a heart or pulsing light. The percent of oxygen saturation is typically indicated by the symbol “SpO2.” Many devices also have a pulse tone that beeps in time with the heart rate.
Leave the sensor on for continuous monitoring. The sensor can become uncomfortable or cause pressure sores if left on the finger too long. Check and/or move the sensor at least every two to four hours. If only a single measurement is required, remove the sensor and press the power button to turn off the device.
- To ensure proper function, read the manual for your specific pulse oximeter.
- Remove nail polish, especially dark colors, before placing the sensor on the finger.
- Place the sensor on the finger before turning on the pulse oximeter for a faster result.
- Pulse oximeters are less accurate if there is poor blood flow to the finger. This may occur if the person is cold, has very low blood pressure or is having a heart attack.
- Carbon monoxide — due to smoke inhalation, carbon monoxide poisoning or heavy cigarette smoking — results in falsely high pulse oximeter readings.
- Altitude may result in lower percent oxygen saturation due to the lower oxygen pressure in the air, particularly if you have recently arrived.
A normal percent oxygen saturation reading is in the 95 to 100 percent range. In the event of a low oxygen saturation measurement, look for signs of respiratory distress. This includes shortness of breath, wheezing, difficulty breathing or a bluish discoloration of the face, lips or fingernails.
Seek medical attention right away if the respiratory distress is a new or uncomfortable symptom. if it’s getting worse or if the pulse oximeter measurement is below 90 percent.
2nd Order Option:
- Digital Thermometer
low quality of the product, not accurate… I bought a really better product for 5$ more…
Llego antes de lo esperado , en solo doce dias despues de enviarlo ( y como esta la situacion ) ES TODO UN PREMIO . El aparato lo he probado y va bien , espero que dure un saludo y gracias