GEOSATpro DSR-R100 RACK MOUNT W/XLR AND BNC

GEOSATpro DSR-R100 w/XLR & BNC 
Commercial Grade MPEG-2 DVB Satellite Receiver

Stability, reliability and performance.

Finally a cost effective MPEG-2 commercial rack mount receiver with EIA-608 closed caption support and professional XLR balanced audio and BNC video outputs! In case of power outage the receiver will auto reboot onto the last channel. If signal interruption occurs (I.E. up-link failure, rainfade, etc.), the DSR-R100 will resume outputting the service once signal returns. The GEOSATpro exclusive System Maintenance function can be activated to reset the receiver automatically to the MUX TDT eliminating the need for an engineer to power cycle a problematic down-link. Eliminate travel to remote rebroadcast locations with often difficult and limited access.

Excellent picture quality and minimal artifacting. Engineers repeatedly comment on the exceptional resolution and clarity. Video adjustment control permits correction of picture set-up before inserting into a closed distribution or cable system, broadcast application. Another GEOSATpro exclusive AV Auto Sync function eliminates lip sync issues associated with non-compliant DVBS transmissions. 

The DSR-R100 is the first commercial rack mount receiver to feature blind scan. Don’t know the channel parameters? Simply select Blind Scan and the receiver will automatically log all available Radio and/or TV channels and program them into the receiver’s channel list.

A PC based channel editor makes set-up easy. Set-up parameters and channel information can be saved for easy duplication and burned into the firmware so it cannot be accidentally erased by factory reset!

Features ::FTA Commercial Digital Satellite Receiver.Main chip:CONEXANT 24301::

• MPEG-2 & Fully DVB Compliant
• Closed Captioning EIA-608 Compliant
• Super low tuner threshold 
• 130MHz high speed CPU
• Wide Symbol Rate from 2 to 45MS/s & Frequency Input from 950 to 2150MHz 
• SCPC / MCPC Receivable from C / Ku Band Satellites 
• Digital Tuner with Loop Through Output
• LNB Control : 22kHz, 13/18V 
• User-friendly OSD Menu with Full Function 
• 256 Colors Graphic User Interface 
• Multi-language OSD Menu
• Variable Aspect Ratio 4:3 / 16:9
  
• Automatic Scheduled System Maintenance Mode
• AV Auto Sync for Perfect Lip Synchronization
  
• Advanced 7 days / 24 hours EPG (Electronic Program Guide)
• 7 Event Timers for multiple channel unattended switching / ON/OFF (Daily, Weekly, Once)
  
• Blind search and NIT search support
• Customized Default Channels Memory Data 
• Small Screen Picture on EPG and TV Channel List Graphic (P-in-P) 
• RS232 Interface for Software Upgrading via PC 
• NTSC/PAL/SECAM Auto / Manual selection / Default
  
• Wide Range Switching Mode Power Supply (SMPS), 90 to 265VAC 50/60Hz 
• S/PDIF Optical Digital audio output
• Balanced Audio Outputs – XLR x  2
• Video Output – BNC x 2
• Video, Audio L/ R & Mono Output – RCA
• Front panel button lock and RCU lock 
• 19″ EIA Rack Mountable
  
• PC based Editor for Satellite, Transponder, Channel programming

Technical Specification

Tuner
Input Frequency	950MHz to 2150MHz
Signal Input Level	-65 to -25 dBm
LNB Power	13.5+/- 0.5V / 18.5+/- 0.7V, 400mA Max.
LNB Band Control	22KHz +/- 4KHz / 0.6V
DiSEqC Control	1.0, 1.2, USALS
Connector	2 x F-type (1 Input / 1 Loop Through)
Demodulator
Demodulation Type	QPSK (ETS300 421 Compliant)
Symbol Rate	2 – 45MS/s
Code Rate	1/2, 2/3, 3/4, 5/6, 7/8, Auto
Video Processor
Decompression	MPEG-2 Main Profile @ Main Level
Video Buffer	64Mbits SDRAM
Data Rate	Up To 15Mbits/s
Video Output	PAL – 25 Frame @ 720 x 576, NTSC – 30 Frame @ 720 x 480
Video Format	4:3, 16:9, Letter Box
Audio Processor
Decompression	MPEG-1 layer 1 and II, Musicam
Output Mode	Stereo, Dual Mono, Joint Stereo, Mono, S/PDIF with AC-3
Data Port
Connector	D-sub Male 9 Pin
Data Protocol	RS232C Interface
Data Rate	625Kbits/s Max.
Front Panel
LED Display	4 Digit LED
8 Keys	8 Keys (MENU, EXIT, OK, CH+/CH-, VOL+/VOL-, RCU Lock)
Remote Control Input	Infra-Red
Rear Panel
Digital Tuner & LNB, F-type	1 x LNB Input, 1 x Loop Through
Audio	2 x XLR Balanced, 2 x RCA Unbalanced
Digital Audio Output	1 x S/PDIF Optical
Video	CVBS 1 x RCA, 2 x BNC
RS-232C	1 x RS-232 D-sub Male 9 Pin
AC Outlet	Unswitched Grounded, 2.5A Max.
Power Supply
Type	SMPS
Input Voltage	90 – 260VAC, 50 – 60 Hz
Power Consumption	25W Max.
Other Specifications
Dimensions (W x H x D)	19″ x 1 3/4″ x 5 1/2″
Weight	3.3 lbs.
Operating Temperature	0 to 45C
Storage Temperature	-40 to 65C
Shipping Dimensions	20.5″ x 4.5″ x 8.5″
Shipping Weight	4.3 Lbs.

Download – GEOSATpro DSR-R100 Series – Owners Manual