Description
Digital Blood Pressure Pulse Oximeter LED Oximetro Oxygen Heart Rate Monitor SpO2
- Quick, accurate, easy to use with a button displays your oxygen saturation, pulse rate, pulse strength.
- 2 AAA battery (not included) power supply, more than 30 hours of battery life and having low power indicator. Automatic shut down after 8 seconds when remove your finger, energy saving.
- Display parameters: blood oxygen SPO2, pulse PR, histogram, PI perfusion index.
- Simple to use, low power consumption, small size, light weight, easy to carry.
- Blood oxygen probe and processing display module are integrated. Monitoring parameter SPO2: suitable for all people above 4 years, measuring range of 70-99%.
- Oximeter saturation: an important indicator of oxygen status in the body. It is generally believed that the normal blood oxygen saturation value should not be lower than 94%, and below 94% is considered as insufficient oxygen supply.
- Heart Rate: refers to the number of beats per minute of the Heart.The same person’s heart rate slows during quiet or sleep, and increases during exercise or emotional arousal.
- Perfusion Index, Pl value reflects the pulsating blood flow, so it reflects the Perfusion ability.The greater the pulsating blood flow, the more pulsating components, and the greater the PI value.Therefore, PI values are influenced by the measured site (skin, nails, bone, etc.) and the patient’s own perfusion status (arterial blood flow).Since the sympathetic nerve affects heart rate and arterial blood pressure (which affects pulse and arterial blood flow), the body’s neuroregulatory system or mental state also indirectly affects the P value.Therefore, the PI value will be different under different anesthesia.
Specification:
- Condition: 100% Brand New
- Blood Oxygen Saturation Range: 70% ~ 99%
- Pulse Rate Measurement Range: 30BPM~240BPM
- Accuracy of Blood Oxygen Saturation Measurement: ±2% within the range of 70% ~ 99%, ≤70% not defined
- Pulse Rate Measurement Accuracy: ±1BPM or ±1% of the measured value (larger value)
- Blood Oxygen Saturation Resolution: ±1%
- Power Consumption: less than 30mA
- Auto Shutdown: auto shutdown in 8 seconds without finger insertion
- Service Temperature: 5C~40℃
- Storage Humidity: 15%~80% when working, 10%~80% storage
- Atmospheric Pressure: 70Kpa ~ 106Kpa
- Battery: 2 x 1.5v AAA (Not included)
- Material: ABS + PC
- Size:57*31*31mm
SPO2:
- Suitable: for all people above 4 years
- Measuring Range: 70-99%
- Analytic: 1%
- Accuracy: 70%–99%±2%
(PR)BPM:
- Measurement Range: 30bpm -250bpm
- Accuracy: 1% or 1bpm
- Blood Perfusion Indicates Pl:
- Measurement Range: 0.2%-30%PI
- Analysis: 1%
Usage:
- Pinch the finger pulse oximeter clip.
- Insert your finger into the rubber orifice (insert your finger fully) and release the clamp.
- Click the switch button on the front panel.
- Do not shake your fingers or move your body during use.
- Read relevant data directly from the display screen, which can display blood oxygen saturation, pulse rate, pulse amplitude and PI perfusion index.
Package List:
- 1 x Manual
- 1 x Oximeter
- 1 x Strap
How to use it:
Step 1
Turn on the pulse oximeter by firmly pressing the power button. The screen should light up almost instantly.
Step 2
Place the sensor — the part that opens and closes like a clothespin — on any finger, with the sensor screen above the fingernail. If the sensor doesn’t have a screen, run the cable along the back of the finger or hand. Don’t use the thumb because readings are less reliable than finger readings.
Step 3
Wait quietly while the pulse oximeter acquires a signal. This may take 10 seconds or more, depending on the device and the conditions. Excessive movement during measurement can decrease the accuracy of the result or may cause an error message.
Step 4
Look at the display to see the heart rate, usually indicated with a heart or pulsing light. The percent of oxygen saturation is typically indicated by the symbol “SpO2.” Many devices also have a pulse tone that beeps in time with the heart rate.
Step 5
Leave the sensor on for continuous monitoring. The sensor can become uncomfortable or cause pressure sores if left on the finger too long. Check and/or move the sensor at least every two to four hours. If only a single measurement is required, remove the sensor and press the power button to turn off the device.
Tips:
To ensure proper function, read the manual for your specific pulse oximeter.
Remove nail polish, especially dark colors, before placing the sensor on the finger.
Place the sensor on the finger before turning on the pulse oximeter for a faster result.
Pulse oximeters are less accurate if there is poor blood flow to the finger. This may occur if the person is cold, has very low blood pressure or is having a heart attack.
Carbon monoxide — due to smoke inhalation, carbon monoxide poisoning or heavy cigarette smoking — results in falsely high pulse oximeter readings.
Altitude may result in lower percent oxygen saturation due to the lower oxygen pressure in the air, particularly if you have recently arrived.
Warning
A normal percent oxygen saturation reading is in the 95 to 100 percent range. In the event of a low oxygen saturation measurement, look for signs of respiratory distress. This includes shortness of breath, wheezing, difficulty breathing or a bluish discoloration of the face, lips or fingernails.
Seek medical attention right away if the respiratory distress is a new or uncomfortable symptom. if it’s getting worse or if the pulse oximeter measurement is below 90 percent.
Z***n –
produits de bonne qualité, precis, merci beaucoup
Customer –
Прибор так себе, экран (лампы) имеет разную яркость в разных местах. Показания занижает на 1-2% (сравнивали с тремя аналогичными приборами).
M***d –
Ha llegado a tiempo. la calidad es mejorable.
Customer –
Cumple con as expectativas y la descripción
N***a –
Спасибо, пульсоксиметр пришёл в целости и сохранности
F***o –
Received item about 1 month and it’s working fine, ordered black but got it white.
Customer –
It looks as described on description. We tested the device after we received the oximeter and it worked.
F***o –
funciona fenómeno, muy fácil de usar
J***s –
perfecto
G***d –
A tardado 30 días, y eso que el envío era desde España.
U***r –
Хорошая вещь
E***r –
Esta funciona bien
M***s –
Descripción exacta, no trae pilas, funciona bien, recomiendo al vendedor
F***e –
Everything is perfect. It’s come in a short time and as soon as I put the batteries in it, it worked. I checked the pulsations with the measurement of my Xiaomi GTS watch and they match. The measurement of oxygen saturation in the blood comes out a suitable value but I cannot compare with the measurement of another device.
A***v –
Устройство работает. Думаю, оно будет очень полезно, если заболеем чёртовым Ковид, чтобы вовремя обратиться к врачам.
B***l –
Fast shipping. Everything Ok. (comes without batteries).
C***z –
All right
S***i –
Oximeter in a very good condition and arrived perfectly integer. Working as expected. Very good!
A***n –
It works!
E***a –
Todo ok. Parece que funciona bien.
F***r –
Работает. Показывает сатурацию и пульс. Упакован хорошо. Нужно 2 батарейки ААА.
J***o –
Aparentemente de una calidad baja.
A***m –
Looks like everything’s OK. The measurements are being carried out.
J***a –
Según lo esperado
E***r –
precio caro, calidad media
E***r –
El vendedor dice que hace los envíos desde España y es mentira. No tienen buen seguimiento del envío. No volvería a comprarles nada.
J***Z –
Very accurate, I have to check your accuracy in the measurements.
L***Z –
Igual que en la foto. Aporta datos con mucha rapidez. Viene sin pilas
E***a –
funciona bien.