Boguang 2pcs 100w Flexible Solar Panel cell Module 200W DIY Kit PV RV 12V /24V Solar Panels

Packing listing：

•  2 pcs 100w solar panel
•  20A 12v/24v charge controller
•  1 set Extension cable with PV connector
•  1 set cable with alligator clip ( connect to battery）
•  1 set 2 in 1 PV connector （ in parallel solar panel）
• ​

Semi-flexible

waterproof

The internal diode can prevent leakage at night.

20A charger controller :

• Batt voltage：12V/24V auto
• Charge current : 20A
• Discharge current ：20A
• USB output ：5V/2A
• Self-consume ：<10mA
• Operating temperature ：-35~+60 ℃
• suitable for : lead acid batteries , lithium ions
• Build-in short-circuit protection, open-circuit protection ,reverse
• 

Extension cable with PV connector :

• Model : 1*2.5mm

• Number of cores : single core multiple strands

• The maximum external diameter of the wire : 5.3 ± 0.2 (mm)

• Nominal cross section : 2.5 (mm)

• Uses : Photovoltaic power generation

• Core material : tinned copper wire

• Product Certification : TUV

• Voltage rating : 0.6/1KV

• Rated voltage : 1000V
  
  

• length：3M
• cable with alligator clip
• Model: 1*2.5mm
• Number of cores : single core multiple strandsTh
• e maximum external diameter of the wire: 5.3 ± 0.2 (mm)
• Nominal cross section : 2.5 (mm)
• Uses :  Photovoltaic power generation
• Core material : tinned copper wirePr
• Product Certification : TUV
• Voltage rating : 0.6/1KV
• Rated voltage : 1000V
• Length：3M 2 in 1 PV connector
• Maximum working voltage : DC1000V
• Rated Current : 30A
• Flame class : UL94-V0
• Contact resistance : ≤5mmΩ
• Shell Protection degree : IP67
• Specification of Connecting Line : 4mm²
• Contact Material : Copper,Tin plate
• Ambient temperature range ：-40～+85℃
• Safety Level : class‖
• 

Solar system kit wiring method and precautions :

• The solar system kit connection is divided into parallel connection or serial connection. The controller must be first connect the battery , and then connect the solar panels.
• When the solar panels are connected in series or in parallel, paid to the highest PV input voltage of the controller. The voltage connected in parallel to the controller after the series connection cannot exceed the maximum input voltage of the controller.
• The total input power of the solar panel can’t be greater than the rated power of the controller, otherwise, there is a risk of burning the controller.
• When the cable is connected to each component, the connection should be stable and there should be no looseness.
• The positive and negative poles of the controller and battery should be checked clearly. Do not reverse the positive and negative poles.
• When the power rating of one controller is insufficient to meet all solar panels, multiple controllers can be simultaneously connected to the battery.