Bergstrom POLE wire fishing cable kit

PULLS WIRE across drop ceilings, sheet rock, trusses, bar joists, etc. through enclosed ceilings with ease under floors through tight crawl spaces ALSO: provides safety with non-conductive material captures wire with the GRABBER TOOL pushes wire into dead end places PULLS WIRE AND pierces insulation in walls moves up or down walls provides safety with non-conductive material AND MORE!

Pole Kit includes:
5x Standard Ceiling Red poles at 5 ft. each
1x Thin Wall White pole at 5 ft. each.
2x Thin Wall Orange poles at 5 ft. each.
1x Carrying container.
2x No-Tape-Tool (attached to pole)
1x Grabber-Tool (attached to pole)

PULLS WIRE AND

• pierces insulation in walls
• moves up or down walls
• provides safety with non-conductive material
• AND MORE!

Use a 12 gauge wire to form a capture tool by bending it as shown above. Tape the wire to the pole using electrical tape.

 The No Tape Tool allows you to attach the cable without using tape. The harder you pull, the tighter it holds the cable.

Tips for using The Pole:

1. Push the pole and pull the cable behind for the best performance of the pole.
2. A small drop of oil on the threads every few months keeps them running smoothly.
3. If the fiberglass of the pole is badly scratched during use it may give you a sliver. Use a rag to rub vigorously over the area to return the smooth finish.
4. Always use the rounded tips front and rear of the assembled poles so threads are not exposed and damaged.