Water Maker / Water Distiller – 750W 4L Household Distilled Pure Water Maker.
Distilled water is water that has been boiled into vapor and condensed back into liquid in a separate container. Impurities in the original water that do not boil below or near the boiling point of water remain in the original container. Therefore, distilled water is one type of purified water
- Stainless Steel Water Distiller Machine for Home Hospital Lab Office,
- Easy to operate, no installation required,
- Produces water of the safest and cleanest condition,
- Seamless round shaped exterior,
- Durable, yet lightweight and compact enough to travel with,
- Effectively removes most tap water impurities,
- Water bottle included.
- Rated voltage: 220V
- Rated frequency: 50HZ
- Power rating: 750W
- Volume: 4L
- Degree of evaporation:1L/H
- Over-temperature safe: cut off at temperature of 160°C.
Water Distiller Package includes :
- 1x Distiller
- 1x Water bottle
- 1x Discharge cap
- 1x Bottle cap
- 1x Main power wire
- 1x English Instruction Manual
Notes Before Ordering:
Buyers of distilled water machines should know before buying:
1) About the carbon filter: Our charcoal filter is a charcoal bag. Because the charcoal bag is powdery, the powder is not allowed to be exported to customs. The express company prohibits us from putting charcoal filters in the packaging. The courier will Take it out. If the customs inspects the powder, the package will be returned and a severe fine will be imposed. Therefore, the package does not contain a charcoal bag, even without a charcoal bag distilled water machine can still work completely. Of course, buyers can also spend a small amount of money to buy charcoal bags locally
2) Regarding the glass bottle: Some buyers found that the glass bottle was broken after receiving the goods. It is difficult for us to guarantee that it is still intact after long-distance transportation, because many customs are too violent when sorting packages, which leads to the situation of fragmentation. Many, we usually re-issue plastic bottles or compensate buyers, so please contact me in time. In addition, I do not recommend re-sending the glass bottle because it is easy to break again. I hope the buyer can understand. And the bottle used for distilled water can be replaced with any other jar, which does not affect the use.
3) Regarding dirt: It is difficult to avoid residual dirt when a new machine leaves the factory, and the machine must be carefully cleaned before use. It is recommended not to drink the distilled water obtained in the first few times until the water is clean and free of odor and impurities.
The cleaning method is as follows:
- Please wipe the outside of the body gently with a neutral detergent and keep it dry.
- The inside of the stainless steel tank needs to be cleaned with clean water every day to clean the remaining precipitated impurities after distillation. Every month (or depending on the amount of dirt in the tank), please use the stainless steel tank cleaner to remove the dirt.
- Inject (hot) water into the stainless steel tank to a little higher than the dirt surface.
- Pour the cleaning agent (depending on the amount of dirt in the tank) into the tank.
- Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank.
- Pour out the water after 15-30 minutes and rinse the inside with clean water.
- If all the dirt cannot be removed at one time, the above actions can be repeated.
- The remaining dirt is not harmful to health, please rest assured to use.
4) Regarding damage to accessories: Usually, we will inspect and test the machine before delivery to ensure that the machine can be used normally after it reaches the buyer. If the buyer has problems such as button detachment or damage to the body after receiving the machine, this is likely to be caused by logistics. Please contact me in time, I will give you a satisfactory solution or compensation.
5) About the reset button: The reset button is after the machine is dry-burned and automatically powered off, after the machine cools down, press it to reset it, and then the machine will start a new job.