Save 5%

on orders $200+

1-888-519-9595

 Search Site

Sadoun Solar Mono-Crystalline Silicon Photovoltaic Solar Power Module

PWM220W

$669.00*

($639.00 each if you buy two or more)

After 5% instant cart discount

Wholesale Pricing available to dealer and distributors.  Contact us today!

These solar panels can be used as a single module or wired together for increased power. These mono-crystalline cells are reliable, virtually maintenance-free power supply designed to transfigure sunlight into electricity at the highest possible efficiency.  The cells are encapsulated between an impact resistant glass and Tedlar backing, ensuring decades of weather resistant use. The aluminum frame has mounting holes on the back for easy mounting.

Regular $935.00 Each Panel

 

Factory packed two panels per shipping box

Box Gross Weight: 48 KG (106 lbs)

Box Dim: 69" x 39" x 6"

Installation Manual (PDF)

• MULTI-CONTACT MC4 latching cable connectors to meet UL/NEC standards

• Blocking Diode Protected

• Type of cell used is monocrystalline silicon

• Tempered glass, EVA lamination, and weatherproofed

These panels are perfect for:

• Grid tie systems
• Recreational vehicles
• Campers
• Telecom equipment
• Battery charging systems
• Building integrated power system
• Remote power systems
• Pumping systems for irrigation, rural water supplies and livestock watering
• Aviation obstruction lights
• Cathodic protection systems
• Desalination systems
• Railroad signals
• Sailboat charging systems
• Microwave / Radio repeater stations
• Electrification of villages in remote areas
• Medical facilities in rural areas
• Power source for summer vacation homes
• Emergency communication systems
• Water quality and environmental data monitoring systems
• Navigation lighthouses, and ocean buoys.

These panels went through the following Quality tests:

• Thermal shock test
• Thermal/freezing and high humidity cycling test
• Electrical isolation test
• Hail impact test
• Mechanical, wind and twist loading test
• Salt mist test
• Light and water-exposure test
• Field exposure test
• Factory is ISO 9001certified
• Made in China

Solar Panels General Installation Instructions

• Installing solar photovoltaic systems may require specialized skills and knowledge.
• Installation should be performed only by qualified persons.
• If panel is installed by non-qualified installers, then warranty is void.
• Each module comes with a permanently attached junction box and #12AWG wire terminated in connectors. Fitted cables can be provided to customers for ease of installation if desired.
• Installers should assume the risk of all injury that might occur during installation, including, without limitation, the risk of electric shock.
• One individual module may generate DC voltages greater than 30 volts when exposed to direct sunlight. Contact with a DC voltage of 30V or more is potentially hazardous.
• Do not disconnect under load.
• Photovoltaic solar modules change light energy to direct-current electrical energy. They are designed for outdoor use.
• Modules may be ground mounted, mounted on rooftops, vehicles or boats. Proper design of support structures is responsibility of the system designers and installers. Use of mounting holes is suggested in a following paragraph.
• Do not attempt to disassemble the modules, and do not remove any attached nameplates or components from the modules.
• Do not apply paint or adhesive to module top surface.
• Do not use mirrors or other magnifiers to artificially concentrate sunlight on the modules. Do not expose backsheet foils directly to sunlight.
• When installing the system, abide with all local, regional and national statutory regulations. Obtain a building permit where necessary.

Safety precaution for installing a solar photovoltaic system

• Solar modules produce electrical energy when light shines on their front surface. The DC voltage may exceed 30V. If modules are connected in series, the total voltage is equal to the sum of the individual module voltages. If modules are connected in parallel, the total current is equal to the sum of individual module currents.
• Keep children well away from the system while transporting and installing mechanical and electrical components.
• Completely cover the module with an opaque material during installation to keep electricity from being generated.
• Do not wear metallic rings, watchbands, ear, nose, lip rings or other metallic devices while installing or troubleshooting photovoltaic systems.
• Use only insulated tools that are approved for working on electrical installations.
• Abide with the safety regulations for all other components used in the system, including wiring and cables, connectors, charging regulators, inverters, storage batteries and rechargeable batteries, etc.
• Use only equipment, connectors, wiring and support frames suitable for a solar electric system. Always use the same type of module within a particular photovoltaic system.
• The electrical characteristics are within ±10 percent of the indicated values of Isc, Voc, and Pmax under standard test conditions (irradiance of 100mW/c㎡, AM 1.5 spectrums, and a cell temperature of 25°C (77°F))
• Under normal outdoor conditions the module will produce current and voltages that are different than those listed in the date sheet. Data sheet values are values expected at standard test conditions. Accordingly, during system design, values of short-circuit current and open-circuit voltage should be multiplied by a factor of 1.25 when determining component voltage ratings, conductor ampacity, fuse ratings and size of controls connected to the modules or system output.
• Refer to section 690-8 of the National Electrical Code for an additional multiplying factor of 125 percent (80 Percent derating) which may be applicable.

Solar Panels Product identification

Each Sadoun Solar Panel module has two labels on its rear side providing the following information:

• Nameplate: describes the product type; rated power, rated current, rated voltage, open circuit voltage, short circuit current, all as measured under standard test conditions; weight, dimension etc. The maximum system voltage for UL listed modules is 600 volts DC and is shown on the nameplate. Maximum fuse rating is also shown.
• Bar code: each individual module has a unique serial number. It is permanently attached to the interior of the module visible when viewing from the front of the module. This bar code is inserted at the beginning of laminating.

• Payments

• Shipping Info

• Contact Us