The SWM-8 allows installers to run an AT9 or AU9 DirecTV satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable. At the end of the single wire, a STS-2, STS-4, or STS-8 splitter is required (not included) to distribute the signal to as many as 4 DVR's or 8 HD receivers! The STS series of splitters are specially designed for the SWM-8; you must have an STS-2, STS-4, or STS-8.
SWM Port Single Wire Solution is currently ONLY Compatible with:
- HR21 HD DVR Receivers
- H21 HD Receiver
- HR20 w/ .2042 Firmware Update
- H20 w/ .2042 Firmware Update
The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-8 unit. DVR's using the "Legacy" ports require 2 cables coming back to the SWM-8 unit.
Features:
Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners Provides two outputs to serve two customer dwellings (typical) Contains a built-in diplexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling Provides AGC for the satellite input signal.
Die-cast housing is suitable for both indoor and outdoor use.
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99/101, 103/110/119 satellites, plus two Flex Ports (95 sat and 72.5 sat) Uses only 1 RG6 between SWM-8 and STS Splitter (not included) Maximum Distance from SWM8 to Splitter: 200'
Specifications:
- Satellite Input Frequency Range: 250 - 2150Mhz
- Terrestrial & SMATV Input Frequency Range: 54 - 806Mhz
- Return Path Input Frequency Range: 5 - 40
- (CMTS return path must use 33-40 MHz band)
- Number of Input Ports: 6 Satellite & 1 Terrestrial /SMATV
- Input Signal Power Level: dBm -45 to -15 dBm per transponder
- Output Frequency Range: MHz 950 - 2150 (Satellite) & 54 - 806 (Terrestrial & SMATV)
- SWM Channel frequencies: MHz 950 - 1800 (Channels 1-9)
- Satellite SWM Module Output Ports: 6 per SWM Module Terr/SMATV/Return
- SWM Module Output Ports: 1 per SWM Module Output
- Signal Power Level dBm -31 dBm (min) per SWM channel
- DC Power: Power Supply (SWM-PI) (24Vdc, 2.1A)
- Ground Stud: 1
- Dimensions: LxWxH mm 167x145x35
- Weight: kg 0.5
- Operating temperature range: C -34 to +52
Also Available:
