| Digital FTA DVB-S2 PCI 2004C WorldDVB DVBWorld HD FTA Satellite Receiver
DVB-S2 is an improved and updated specification to replace the DVB-S standard, ratified by ETSI in March 2005 Today the main use for this new standard is the distribution of HDTV, while the original standard was mainly applied to SDTV services. The development of DVB-S2 coincided with the introduction of HDTV and H.264 (MPEG-4) video codecs. Retail package Includes:
Key Features Supports DVB-S Protocol (EN 300 744) &Support DVB-S2 Protocol Supports DVB-Data Protocol (EN 301 192) Digital Satellite TV and Radio Program Receiving Support HDTV (MPEG2&MPEG4/H.264) Receiving Real Time Digital Video Recording (DVR) and Scheduling Recording Time-Shifting Electronic Program Guide (EPG) Still Frame Capture Multi Free Channel Preview Subtitle Satellite / Transponder Auto Scan IP PID scanning, IP data broadcasting in LAN MPEG2 Video broadcasting in LAN, Generate IP data broadcasting task automatically IP MPEG4 media playing, IP MPEG4 media recording Favorite List Full Screen Display Multi language Switch MPEG-II Software Decoding Software Upgradeable DiSEqC 1.2 / USALS Support IR Remote Controller Available
Specifications: TUNER Input Terminal: F-type 75 Ohm Receiving Frequency: 950~2150 MHz Tuning Range Input Level: -75~-10dBm Carrier Capture Range : ±5MHz Ambient Temperature: 0°C to +70 °C Support MCPC and SCPC
Demodulator & FEC Symbol Rate: 2~45Msps QPSK:1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 8PSK:3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LNB & Switch control LNB Supply Voltage: 13V/18V with Short Circuit Protection DiSEqC: 1.2 Support Data Burst & Tone Burst Antenna and LNB Control: 22KHz Tone Max. LNB Supply Current: 450mA
PCI interface PCI 2.1 Standard Spec. - Host bus burst rate: 132MB/s
- Host bus width: 32 bit
De-Multiplexing A/V Format System Requirements Microsoft Windows 2000/XP32/64 Vista32/64 P3 500MHz CPU or above for SDTV P4 2.0GHz CPU or above for HDTV 128M RAM for SDTV / 256M RAM for HDTV VGA Card with at the least 16MB Memory Microsoft Direct X 8.1 or above Digital Satellite Dish & LNB
DRIVERS & Software  Support is currently LinuxTV, a working driver now exists!, click here. 
 SDK download (includes the SDK to read MAC and send DiSEqC commands, read IR code This product will support IR on board, but without HID compatibility.
| |
