STAB Mini-Positioner DiSEqC 1.2 The mini-Positioner "MINI-POS MP02" is used by installers to perform a perfect and reliable DiSEqC 1.2 motorized system installation. Easy to use, it allows you to quickly aim a dish with the help of a field signal strength meter. The MP02 generate the following commands: GO EAST, GO WEST, GO TO "0" (South), and limit set. Allows you to store and recall up to 4 satellite positions directly from a PCI card, or DiSEqC 1.0 receiver. It is connected between the motor and the receiver. "MINI-POS" enables you to peak the signal before storing first sat position in the receiver. Once the signal is peaked, the rest of the satellites can be located using the USALS or DiSEqC 1.2 feature in the receiver. The MP02 is a perfect tool for receivers that don't have DiSEqC 1.2 or USALS capabilities. It allows the receiver owner to add a DiSEqC 1.2 motor to move the satellite dish to up to 4 different satellites.
| TECHNICAL SPECIFICATIONS: |
| Power supply |
13 / 18 Vdc |
| Consumption in stand-by mode |
5 mA |
| Consumption in operating mode |
15 mA |
| Attenuation |
6 <dB |
| Operating mode |
Completely transparent |
| Generated commands |
DiSEqC 1.2 |
| Programmable positions |
4 Sat Positions |
| East & West Limits |
Programmable |
| Connections |
F connectors |
| Dimensions |
32 x 74 x 30 mm |
| Weight |
0.25 Lbs |
Tech Support forums:
http://www.sadoun.net/forums/stab-hh-motors/
|
MP02 
Out of stock see other Positioners here |
