Connect Your Existing Satellite Dish to Two Receivers!
A Dual LNBF looks at one orbital location. This LNBF is appropriate for an
18” (or "DISH 300”) dish antenna or to replace your legacy lnbf. Make sure your 18" dish has a D shaped LNBF feed bracket. If it has a rectangular shaped bracket, this LNBF will not fit on the dish. In this case, take a look at the
DSL2 LNBF we have.
0.4 dB NF
FEATURES:
-
Dual Output LNBF
-
Covers DBS Ku Band Satellite Frequencies 12.2-12.75 GHz
-
Low Noise Figure of
0.4 dB for improved signal reception (specially on weak signal) and low interference.
-
Voltage-Controlled RH/LH Switching (13/18 V)
-
The feed diameter is a standard 40mm thus allowing this LNB to be mounted effortlessly on almost any offset dish, such as Fortec Star 80,90,100, and 120cm
dishes
we sell.
-
Also compatible with "D" style LNBF feedarms
-
Circular type.
|
Specification
|
Value
|
|
Input Frequency Range
|
12.2 ~ 12.75 GHz
|
|
Output Frequency Range
|
950 ~ 1450 MHz
|
|
LO Frequency
|
11.250 GHz |
|
Conversion Gain
|
56 dB |
|
Cross Pol. Isolation
|
18 dB |
|
Noise Figure |
0.4 dB |
|
Input Reflector Type
|
Offset |
|
Gain Flatness
|
+/- 4 dB V.Pol and +/- 3 dB H.Pol
|
|
L.O. Frequency Stability:
(+25°C) |
+/- 500 KHz |
|
(-30°C ~ +60°C) |
+1.9MHz @-30°C, -1.7MHz @+60°C
|
|
L.O. Phase Noise:
(1 KHz Offset)
|
-55.61 dBc/Hz
|
|
(10 KHz Offset) |
-84.61 dBc/Hz
|
|
(100 KHz Offset) |
-101.6 dBc/Hz
|
|
Output Connector
|
75Ohm F Type Female
|
|
D.C. Power Supply
|
10.5 – 19 V |
|
D.C. Power Consumption
|
90 mA (Typ.) |
|
Polarity Switching Voltage
|
Right-hand: 10.5 ~ 14 V
Left-hand: 16 ~ 19 V
|
|
Operating Temperature
|
-30°C ~ +60°C
|
![[ Super Buddy ]](../../Products/Virtual_Rock/superbuddyspecp_small_small.jpg)
