Metal Mounts & Gears Box Inside (others use plastic)
Only motor with Automatic Zero Backlash (Slack) Adjustment
True handling of up to 120 cm Steel dish (Max 31lbs).
High 0.1 degree precision resolution (others have a 0.3 or more. The lower the number the better)
Widest +/- 80° Azimuth Rotation angle (others travel up to +/- 75)
Bigger 55MM (2.16") Shaft
DiSEqC 1.2, 1.3, USALS or "Goto X"
All Stainless Steel U-Bolt mounting screws (others use galvanized metal screws)
Heavy duty construction & precise technology.
Software Limit Protection
This is one of the best motors in its class. Brand new design and full of features.
With a motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.
Note: This motor comes with a 55mm (2.16") shaft to fit dishes with U-Bolts. If your dish has a Pole mount bracket with 42mm (1 5/8") diameter, then you will need to order the DG380B model or the 42mm shaft below.
Special design for any receiver with DiSEqC 1.2 & USALS control
Does NOT require a receiver with built-in Positioner.
Only one coaxial cable control
Go to X function
Ultra low noise
Metal Main Gear
Adjustable hardware limits
Easy installation with LED Indicator
Manual EAST / WEST buttons
Mounts on Pole Size up to 2.5"
Shaft Size: 2.16" (55mm) shaft diameter to fit large dishes with U-Bolts
Optional Shaft Size: 1 5/8" (42mm) Shaft to Fit smaller dishes with Pole-Bolt brackets.