|
|
Home
: Installation Supplies
: Signal Meters : PicoPro
PICO-PRO Signal Analysis Meter
Pico Macom’s PICO-PRO is a full-featured handheld signal
performance meter providing a complete signal test system in easy-to-carry
protective case. The PICO-PRO allows choice of 4 pre-programmed
user-selectable band plans accessed via keypad
entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF
channels. Direct-entry channel or frequency tuning selections provide
maximum flexibility in headend and distribution networks that employ narrow
digital signals, or non-standard frequency applications. The meter displays
instantaneous digital signal levels when testing digital carrier levels. The
large LCD screen displays signal level as a bar-graph with digital numeric
readout. This backlit display provides screen illumination in dimly lit
work-spaces, allowing behind rack and night meter operation. The PICO-PRO
enables testing of carrier-to-noise, multiple channels, and full, reduced,
and single band scan for complete testing flexibility. The meter’s functions
include not only signal measurement when AC/DC voltage is present under
test, but, when selected, voltage-level display.
- Full-channel operation 5-870 MHz Frequency Range
(Channels T7-T13, 2-135)
- 4-keypad channel plans (TV, CATV/STD, CATV/HRC, SUB/VHF)
enable quick switching between sources
- Single keypad frequency or channel selection provides
compatibility with channel, data, and other narrow bandwidth carriers
- Full spectrum-analyzer scan provides display of up to
100 channels simultaneously
- Carrier-to-noise testing provides accurate testing of
system performance anywhere in the headend or distribution system
- Large easy-to-read backlit Graphic LCD display provides
quick-glance signal reference even in dimly lit work environments
- Forward and reverse band capability makes this meter suitable for
all CATV/SMATV applications
- Graphic spectrum display mode enables ingress and spurious
measurements
- Signal analysis features include video/audio, carrier/noise ratio
and hum modulation
- Simultaneously measures multiple channels for simplified amplifier
tilt balancing
- Multiple channel plans suitable for use in CATV and off-air
applications
- AC/DC voltage readings and compatibility allow
measurements through input connector, enabling signal and voltage
measurements when voltage is present in tested signal without costly
adapters
- 8-Hour rechargeable NiMH batteries provide cost savings
- Automatic power shut-off feature extends time between
recharges
- Bright orange high impact plastic housing and soft
leatherette-vinyl protective case with belt clip included
- Installation Manual
Specifications
SIGNAL ANALYSIS METER
-
Frequency range:
5MHz ~ 870MHz
-
Frequency resolution ratio
10kHz
-
Measured band width: 280kHz
Level Measurement
-
Measurement range: -35dBmV ~ 60dBmV
-
Measurement accuracy: ± 1.5dB
-
Resolution ratio: 0.1dB
-
Method of detection: Peak detection
-
Input resistance: 75 ohm
Carrier-noise ratio (CN)
- Signal input range: > 10dBmV
- Measurement accuracy: + 2dB
- Voltage Measurement
- Input range:
0 ~ 80V AC/DC
- Measurement accuracy: ± 2V
- Resolution ratio: 0.1V
- Dimensions:
4.3˝(L) x 2.6˝(D) x 10.0˝(H)
- Weight: 2
lbs.
All the above technical indexes are under indoor temperature
(25°C).
- Medición sencilla y con retorno para
canales de CATV/SMATV.
- Pantalla de Cristal liquido retroiluminada.
- Prueba de relación portadora-ruido, permite
conocer el desempeño del sistema, tanto en la cabecera como en el
sistema de distribución.
- Compatibilidad con canales, datos y otras
portadoras de ancho de banda estrecha.
- Barrido completo del espectro, permite
visualizar hasta 100 canales simultáneamente.
*
after today's additional
5%
instant cart discount - offer expires soon
|
Continue SHOPPING
|
