|
|
PFAP550M Pico Macom
Processor,Analog,Agile,Ch.2-125/2-PPP
Sale $539
806 MHz Agile Signal Processor The
Pico Macom PFAP550M is a frequency agile, microprocessor-controlled,
professional re-broadcast grade double-heterodyne signal processor
that converts one channel to another without the need to demodulate
and remodulate the signal. Front panel push-button controls enable
input and output channel selection. The unit uses state-of-the-art
low noise PLL, SAW filter, and AGC echniques to provide superior
picture quality and reliability thereby dramatically improving
customer satisfaction. The PFAP550M’s unique sync tip detection AGC
design delivers consistently high quality picture even at extremely
low input levels. Its high-selectivity SAW filtering enables the
unit to process any single cable channel, even in the most crowded
systems. In the event of power failure, the microprocessor’s
non-volatile memory preserves input and output channel
identification guaranteeing proper reset when power is restored. The
PFAP550M’s high frequency and extremely high accuracy
phase-locked-loop oscillators enable the unit to meet the frequency
offset and stability requirements of FCC Docket 21006. Pico Macom
backs up this product with its industry leading 5-year limited
warranty.
Specifications:
- RF Output Frequency: 54-550
MHz
- Input Frequency: 54-806 MHz
- Input Channels: 2 to 125 (HRC,
IRC)
- Output Channels: Channels 2 to
78 (HRC, IRC)
- Maximum Output: 57 dBmV min.
- Input Level: Min. 0 dBmV (For
55 dB min C/N) Max. 25 dBmV
- Output Adjust Range: 48-60
dBmV Gain: 70 dB
- AGC Range: 0 dBmV to +25 dBmV
- input AGC Type: Keyed sync tip
AGC
- Stability: ±5 dB Noise Figure:
8 dB VHF, 10 dB
- UHF Differential Gain: <5% (10
to 90% APL)
- Differential Phase: <5° (10 to
90% APL)
- Visual C/N: 55 dB @ 0 dB
- input Out-of-band C/N: -65 dB
- Frequency Response: ±1.7 dB
- Selectivity: -60 dB (Adjacent
Channel)
- Spurious Outputs: In-band >-60
dB Out-band >-60 dB
- Aural Carrier Adjust Range: 12
dB
- Return Loss: Input/Output: 12
dB
- typical IF Output: 35 dBmV
(45.75 MHz)
- Controls: Aural Carrier and
Output Level General
- Power Input: 105 to 130 VAC,
60 Hz, 15 W
- Operating Temperatur e: -10° C
to 50° C
- Dimensions: 19½(L) x 9½(D) x
13/4½(H)
- Weight: 7.9 lbs. Test Point:
-30 dB
- NOTE: In stand-by mode, this
unit is an agile 550 MHz modulator
|
Continue SHOPPING
|
