When you
1st turn ON the receiver, you will see the LANGUAGE screen:
Click
OK on remote.
Select
Advanced (ALL Satellites)
Adjust
time then select NEXT
Connect
coax cable from satellite dish to SAT IN on back of receiver.
Click
OK.
You will
see the Channel Manager screen below. Scroll RIGHT one time to
"Installations"
Click on
Channel Search
Enter
Password 0000
You will
see the default screen above. Leave all settings at default
value. Adjust dish
Elevation and Azimuth to proper angles for your location
until you see the Signal & Quality Bars indicating a lock on
satellite. Scroll down to SEARCH and click OK.
The
receiver will start downloading the channels from the satellite.
When
search is completed click OK
Click
Exit on remote control to exit the Installation menus. No
you can scroll channels up or down.