| Home > Satellite Receivers > FTA Receivers > DSR200CGEOSATpro DSR200C FTA / IRDETO CAS
Sale $120 
Slim, Compact and Feature Packed Standard Definition Satellite Receiver.
GEOSATpro receivers are designed to provide exclusive and innovative features that are only available with the GEOSATpro brand. Automatic firmware updating in North and central America is available via satellite. No files to download or cables to connect to a PC. The receiver will always have the latest factory firmware, updates and new features as they are introduced! One year warranty protects you against any factory or design defects.
Experience fast and reliable channel selection. Superb picture quality supported with component, composite, s-video, or RF modulator reproduces vivid picture clarity on any TV, projector or monitor. Clear, crisp, high fidelity audio is available through optical Dolby Digital, RCA and modulated outputs. 
Click here for setup instructions for Galaxy 19 (97W)
Easy Installation
Installations are easy with the intuitive on screen guide which directs you through the activation, set-up and aiming steps. An advanced signal meter automatically appears on screen with a graphical spectrum display indicating signal changes as the dish is adjusted and updated twice a second! No long wait times for the receiver to lock onto a signal. A convenient signal button on the remote control allows instant access to the signal meter at anytime. A signal beeper provides audible verification of satellite acquisition. The DSR200c has an exciting new feature that automatically updates the receiver with additional channels and adds new features as they become available via the satellite! This OTA option allows automatic updating of important firmware and new channels anytime new Television or Radio channels are added. Subscription channels such as CCN (Church Communication Network) are accessed with the built-in card reader which is compatible with IRDETO and supports cardless BISS. Electronic Program Guide information is often available on select channels providing program information up to 7 days in advance. Easily locate your favorite shows for viewing. Select the program that you wish to view or record and click on the title. The receiver will automatically tune the channel for viewing or recording with an attached VCR or DVD recorder. Ten timers are also available to automatically tune or record TV or Radio shows one time or reoccurring daily or weekly series.
Want to create you own customized channel or satellite lists? The GEOSATpro DSR200c supports firmware and channel list updates via USB drive. Manage your channels, satellites and transponder lists on a PC with the popular channel editing software, Channel Master by SharpC.
Glorystar Features
Weekly updates provide additional promotion and information channels exclusive for Glorystar viewers. Learn about the newest channels, upcoming special programming and equipment specials only available with a Glorystar approved GEOSATpro receiver. Glorystar offers viewers access to additional optional programming through partnerships with pay-per-view and subscription based channels. An Electronic program guide is in development with the support of Glorystar broadcasters and slated for introduction in 2010.
Hobbyist and Ethnic Channel Viewing
The GEOSATpro DSR200c satellite receiver is an excellent choice for receiving standard definition, digital, Free to Air and Direct To Home subscription programming available on Galaxy 19 or other programming from KU-Band satellites. What free TV and Radio channels are available? Check out the list at: http://www.satelliteguys.us/thelist/
- Watch hundreds of free channels from around the world. TV and Radio channels available in dozens of languages: English, Arabic, Farsi, Korean, Thai, Vietnamese, Mandarin, Cantonese, Spanish, and many more!
- Watch national and international news, sports, movies, soaps, theater, music performances and other entertainment events.
- Backhauls of live sports and wild feeds directly from the remote locations as the news stories break!
- Precise motor control for multiple satellite reception.
- Designed by a satellite hobbyist to provide the reliability and flexibility of advanced user menus and features.
- Supports the most demanding switching configurations.
- Features an extremely sensitive tuner with exceptional signal threshold.
Receiver Features:
- Upgrade Software & Update Channel Database via Front Panel USB 2.0 Port
- Upgrade Software & Update Channel Database via Satellite OTA
- MPEG-II Digital & Fully DVB Compliant.
- C/KU band control for each antenna
- LNB Tone Switch 22KHz mode On/Off/Auto
- Multi-LNB controlled by DiSeqC 1.0, 1.1, 1.2
- Motor Control by DiSEqC 1.2 and USALS
- 5,000 Channels Programmable
- Blind Scan with Upper / Lower Frequency Range Selection
- Universal Smart Card Reader Supporting IRDETO
- BISS Cardless Decryption Enabled
- Picture In Graphic (PIG)
- Electronic Program Guide (EPG) for On Screen Channel Information
- 10 Timer Events for Daily, Weekly, Once Channel Selection
- Multi-Language supported for Menu and OSD (English, Spanish, French)
- Zoom Function by 2x, 4x
- Parental Lock
- Closed Caption Support
- Glorystar Christian Karoke Lyric Support
- Dolby Digital Bitstream Out through S/PDIF
- CVBS Video & Audio Output via RCA
- Component Y/Pb/Pr Output via RCA
- S-Video Output
- 7-Segment(4-digit) Type of Front Panel Display
- Glorystar Approved for OTA and EPG Features
Conditional Access Interface - SMART CARD 1 Slot:
ISO 7816, GSM11.11 and EMV (payment systems) compatibility
Tuner & Channel - Type 1 × F Type, IEC169-24, Female
- Frequency Range 950MHz to 2150MHz
- RF Impedance 75 Ohm unbanlanced
- Signal Level -65 to -25 dBm
- LNB Power 13.5/18.5Vdc +/- 5%, 0.5Amax, Overload Protected
- 22KHz Tone Frequency : 22KHz +/- 2KHz, 0.6Vpp +/- 0.2V
- DiSEqC Control Versions 1.0, 1.1, 1.2, Tone burst A/B, USALS
- Demodulation QPSK
- Input Symbol Rate 2~45 Ms/s, SCPC/MCPC
- FEC Decoder Convolution Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 With Constraint Length K = 7
System & Memory - Main Processor 32-bit ARM946 RISC Processor
- Flash Memory 4 Mbytes
- System Memory 16 Mbytes
- Channel Capacity Digital Channel: 5,000
- Front 7-segment Display (4 digit)
MPEG Transport Stream & A/V Decoding - Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification
- Profile Level MPEG-2 MP@ML
- Input Rate Max. 90Mbit/s
- Aspect Ratio 4:3, 16:9, Letter Box
- Frame Rate 25Hz for PAL, 30Hz for NTSC
- Video Resolution 720x576 (PAL), 720x480 (NTSC)
- Teletext Through VBI
- Audio Decoding MPEG / MusiCam Layer I & II
- Audio Mode Single Channel / Dual Channel Joint Stereo/Stereo
- Frequency Response 20 ~ 20kHz, <+/-2dB; 60Hz ~ 18kHz <+/- 0.5dB
- Sampling Rate 32, 44.1, 48KHz
A/V & Data In/Out - RCA Output CVBS, L, R Output (Yellow, White, Red Jack) with Volume Control
Component Video (YPbPr) Out - S-VHS Output 4 Pin Mini
- SPDIF Dolby Digital Bitstream Out (Coaxial, Toslink Optical)
- Data Interface - RS-232, Bit Rate: 115,200baud
- Data Interface - USB 2.0
RF Modulator - RF Connector 75 ohm F-Type
- Frequency Range VHF CH3, CH4
- TV Standard NTSC
- Audio Output Mono with Volume Control
Power Supply - Input Voltage AC 90V ~ 250V, 50Hz ~ 60Hz
- Power Consumption Max 30W
- Standby Power Consumption <= 10W
- Protection Separate Internal Fuse
Physical Specification - Size (W x H x D) 10.25" x 2" x 8"
- Weight 3 lbs
Environmental Condition - Operating Temperature 0 °C ~ 40 °C
- Storage Temperature -10 °C ~ 50 °C
- Operating Humidity Range 10~85% RH, Non-condensing
- Storage Humidity Range 5~90% RH, Non-condensing
| MPEG Transport Stream & AV Decoding | | Transport Stream | MPEG-2 ISOIIEC 13818 / Transport Stream Specification | | Profile Level | MPEG-2 MP@ML | | Input Rate | Max. 90 MbiU | | Video Resolution | 720 x 480 (NTSC) | | Audio Decoding | MPEG / Musicam Layer I & II | | Audio Mode | Single channel / Dual channel Joint Stereo / Stereo | | Teletext | VBI & OSD | | Sampling Rate | 32, 44.1 and 48KHz | | | | | Conditional Access | | Smart Card | 1 SLOT, ISO 7816, GSM11.11 and EMV (payment system) compatibility
| | Cardless | BISS - 1 Enabled. Private Event - Cardless Authorization | | | | | Tuner & Channel | | | Input Connector | F-type (Output loop-through), IEC 169-24, Female | | Signal Level | -25 to -65 dBm | | LNB Power & Polarization | Vertical: +13.5/18.5Vdc ±5%
Horizontal: +18.5Vdc ±5%
Current : Max. 500mA. Overload protected | | 22KHz Tone | Frequency: 22 ±2KHz | | DiSEqC Control | Amplitude: 0.8 ±0.2V Version 1.0, 1.1, 1.2, USALS Compatible | | Demodulation | QPSK | | Input Symbol Rate | 2 - 45 Ms/s Convolution Code Rate 1/2, 2/3, 3/4, 5/6, 7/8
Constraint Length K=7 | | | | | AV & Data Input/Output | | RCA Output | CVBS Composite (Yellow), L, R Output (White, Red) w/Volume Control
YUV Component Video | | SPDIF | Dolby Digital Bitstream Out (Optical) | Data Interfaces
| RS-232, Transfer rate 115Kbps, 9 pin D-Sub Male Type, USB 2.0
| | OTA Update | Firmware & Channel Update available via Satellite | | RF Modulator | | | TV Standard | NTSC | | RF Connector | 75 Ohms, F-type | | Frequency Range | VHF CH3, CH4 | | | | | System Resources | | | Main Processor | ARM946 Risc Processor | | Flash Memory | 4 Mbyte | | Program DRAM | 16 Mbyte | | Channel Capacity | Digital Channel: 5,000 | | Front | VFD Display (3 Icon, 5 digit Alphanumeric) | | | | | Power Supply | | | Input Voltage | AC 90 to 240V, 50 -60Hz | | Power Consumption | Max 30W | | Protection | Separate Internal Fuse | | Type | SMPS | | | | | Physical Specification | | Size (W x H x D) | 10.25" x 2" x 9" | | Net Weight | 3 lbs |
Note: We have upgraded the discontinued DSR100c to a new model DSR200c. The new model features a front panel USB 2.0 port for firmware and channel list upgrades and is supported by the Channel Master channel editing software. This feature also allows installers to set-up one receiver with the desired channels and order (either DVR1100c or DSR200c use same channel list type .SDB) and copy the channel list onto a USB thumb drive and quickly install the channel list on their customer's receivers. To use this function: - Press Menu and select Utility / USB
- Press the Green button to save either the channel list or firmware and channel list
or - Highlight the new channel list from the file list (.SDB)
- Press OK. Press OK a 2nd time to confirm the programming with the new channel list.
The new firmware (which also is available for the DSR100c and the DVR1100c) adds DiSEqC 1.1 switch support and adds frequency parameters to Blind Scan (allows the user to adjust the upper and lower frequency to speed up scans or select a small range for a specific feed). We also made firmware adjustments to make a lower signal threshold and more reliable signal locks of non-compliant DVB signals. BTW.... Customers can record MPEG 4 channel programming (UTR / PBS / FTV) with the DVR1100c and play the HD files back on a PC or Mac! Download Owners Manual and Glorystar Installation Guide - GEOSATpro DSR100c / DSR200c / DVR1100c - English (PDF)  Download PDF Reader
Download - GEOSATpro DSR100c / DSR200c RS-232 Firmware Upgrade - RS-232 Firmware, Loader Application and Guide | |
