We have 2 versions of this dish. The only difference between the two is the mount bracket. One is a "Pole Mount" version (FC90P, and the other is a "U-Bolt Mount" version (FC90U).
FC90U: The U-Bolt mount version has double U-bolts that allow you to mount the dish on any size post between the size of 1" - 2 1/2". This is the dish to use with a STAB HH motors since the STAB motor has a shaft size of 2 1/8". It also works fine with a Moteck SG2100, Satcontrol, Pansat, and HH90 motor mounts. Notice the high quality U-bolts used here for extra firm support. Competition use only 1 low quality U-bolt.
Specification
Value
REFLECTOR
Type
Offset
Offset Angle
24.62 0
Diameter Short Axis
85 cm (33.5")
Diameter Long Axis
94 cm (37" )
Aperture Efficiency
75% min.
KU – Band Gain @12.5 GHz
39.34 dB
F/D Ratio
0.6
Focus Length
510 mm (20")
LNBF Arm Length (following curve)
46 1/2"
Material
Galvanized Steel
Finish
Polyester Powder Coating
Color
Cool Grey
MOUNTING
Mounting Type
Ground, Pole & Wall Mount
Adjustment Type
AZ / EL
Elevation Angle Range
20° - 75°
Azimuth
0° - 360°
Material
Steel / Galvanized Steel
Finish
Polyester Powder Coating
Color
Cool Grey
Pole Diameter Acceptable
38 – 65 mm (1.5" - 2 5/8")
Net Weight
9.3 kg (20.5 lbs)
ENVIRONMENT
Operational Winds
25 m / sec
Survival Winds
50 m / sec
Ambient Temperature
-40°C ~ +60°C
Relative Humidity
0 ~ 100 %
Excellent construction and easy installation dish. Higher KU band signal gain (33.34 dB) than the competition. Comes with a standard easy fit Pole mount. The Elevation scale is easy to set and accurate. The included LNBF holder allows you to install a 40mm LNBF or a 25mm LNBF with the included adapter. The included mount comes with two support legs that add more wind support to the dish. All hardware screws and nuts are of high quality material. This is one of the best dishes in the market today.
Allows perfect reception of analog, digital and high-definition programs on KU band satellites. Can be used to replace your Dish network or DirecTV single LNBF dishes. It will reduce or eliminate your rain fade signal problem.
This dish comes with a universal mount that lets you put the dish on your roof or exterior wall of your house. This mount has two support struts that will allow extra support and solid installation. These struts ensure added stability to the dish giving homeowners and installers alike peace of mind.
Sample Installations
Buy in Volume and Save
Dish Replacement Parts
U-Bolt Mount: If you want to order the "U-Bolt Mount bracket" only to fit on a FC80P or FC90P, add this to your shopping cart. High Quality U-Bolts, Extra Support, and Non-slip top bracket.
$10
Pole Mount Bracket: This will fit on Fortec Star FC80U, FC80P, FC90U, and FC90P dishes.
$10
Feedarm for LNBF (#17 on dish assembly diagram): Replacement lnbf feedarm for Fortec 90cm dish. Will not work with the 80cm Dish.
$15
LNBF bracket: If you want to order an extra LNBF bracket to fit on any of the Fortec Star dishes, add this to your shopping cart.
$10
LNBF: LNBF is not included with this dish and sold separately.
SSL Secure 
![[ Super Buddy ]](../../Virtual_Rock/superbuddyspecp_small_small.jpg)
