This LNBF is used for the C-band digital / analog satellite signal. It can be mounted on any Prime focus dish using the included scalar ring and mounting screws. LNB is designed for reception of signals in C-Band frequency range between 3.7 and 4.2 GHz. Ideally suited for reception of U.S. satellites.
Special for Digital C-Band Satellite Reception
Extended Frequency 3.7 GHz ~ 4.2 GHz
Bandstacked LNBF
L.O. Freq 5750
High Gain Output
Light Weight Design
100% Waterproof
Adjustable Scalar Ring Included
Model Number
B1SAT STACK
I/P Frequency
3.7-4.2 GHz
O/P Frequency
950-2050 MHz
LO Frequency
Lower Band 5.15 GHz, Upper Band 5.75 GHz
Output Connector
Type "F" Female Connector
LO Initial Accuracy
± 1MHz @ 25° C
Stability (-35°C to +52°C)
± 2.0 MHz
LO Phase Noise
-60 dBc/Hz (@1kHz)
-80 dBc/Hz (@10kHz)
-90 dBc/Hz (@100kHz)
Noise Temperature
17 °K
Crosspol Isolation
20 dB
Conversion Gain
62 - 68 dB
Gain Flatness
± 0.5 dB /27 MHz
Image Rejection
40dB (min.)
Third Order Inter modulation
-50 dBc (min.)
1 dB Compression Point
0 dBm
DC Voltage
10 – 24 VDC (supplied by receiver through coaxial cable)
Use the WS-KU2C Kit to convert your dish to mount a C or C/KU band LNBF and install our conical scalar ring to receive better reception for C band! LNBF is sold separately and it is not included in the below price.
B1 SAT STACK C-Band LNBF With Scalar
