Browse by Product

Home > Switches > DirecTV & FTA Switches > CM6904IFD

Multi-switch 4inx4out

CHANNEL MASTER SAM4402 Approved

4 X 4 Multi-Switch
DirecTV Approved!!!
For use with DirecTV Plus & Para Todos 

Channel Master Multi-switch Model SAM4402 is designed to distribute 2 polarizations (usually RHCP and LHCP or V/H) from 2 satellites to up to 4 IRDs. Polarization selection is by 13V/18V LNB voltage switching. Satellite selection is by a 22KHz tone on the LNB voltage which is present when the second satellite is required.

No power supply is required with Model 6904 as the IRD's voltage is passed to the desired LNB. As only the desired LNB is powered (switched by 0KHz or 22KHz), the IRD's power supply is not overloaded.

• Weatherproof housing! Rubber boots for coax cables included.

• Provides signals from two satellites to up to four receivers.

• Use this device to hook up four receivers to a two satellite dish (with 4 coax connections) or to two dual-LNB dishes where each dish is pointed at a separate satellite.

• Powered by satellite receiver(s).

• Passes power to satellite dish(es).

• Built-in amplifier for DSS signals.

• Does not "diplex" UHF/VHF signals. Add four diplexers  at this unit and four more at the other end if diplexing is desired.

• Note 1: DirecTV compatible. Does not work with Dish Network.

Specifications:

Number of Inputs	4 Sat A LHCP, RHCP; Sat B LHCP, RHCP
Passband	950-2150 MHz
Return Loss (in and out)	12 dB
Gain (and slope)	-2, +2, +4 dB at 950, 1450, 2025 MHz
Isolation (cross pol and cross sat)	40 dB
Maximum Input (16 channels)	-25 dBm per channel
Minimum Input	-50 dBm per channel
Current from IRD (at 18V)	60 mA
Satellite Selection (Sat A)	0 KHz
Satellite Selection (Sat B)	22 KHz
Tone Blocking (IRD to LNB)	Yes
Polarization Selection	13/18 V RHCP/LHCP
Power Pass (max)	300 mA to selected LNB only, diode steered
Thru Voltage Drop	0.6 V