|
Enclosure
|
Aluminum with rubber
gasket sealed end panels |
|
Size (L x W x D)
|
2.8" x 2.8" x 1.3"
(7.1 cm x 7.1 cm x 3.3 cm) |
|
Weight
|
0.6 lbs. (0.27 kg) |
|
Connector Style
|
F-female |
|
Temperature Range
|
0° to 125° F (-18°
to 52° C) |
|
Input Voltage
|
from sat meter, 13
to 18 VDC |
|
Input Current
|
600 mA maximum @ 13V |
|
Output Voltage
|
Tx port 32 VDC, Rx
port 26 VDC |
|
Cable Length
|
Recommend short
jumper, 100' max, RG-6 |
|
Output Current
|
150 mA max (combined
both ports) |
|
Passes RF Signals
|
950-2150 MHz, -60 to
0 dBm |
|
Insertion Loss
|
0.4 dB (974 MHz),
1.1 dB (1563 MHz) |
|
Return Loss
|
10 dB (typical) |
|
Impedance
|
75 Ohm |
|
Warranty
|
12 month limited |
| |
*Specifications subject to change without notice |
| |
Disclaimer: |
It is the
responsibility of the user, prior to using the Blue Bunny, to verify
compatibility of voltages and currents with the manufacturers of the
specific satellite meters and LNBs. Applied Instruments, Inc. is not
responsible for damage caused by misuse or non conforming meters and/or
LNBs. |
NOTE: The Blue Bunny Voltage Step Up
cannot be used with the WildBlue TRIAs manufactured by Ko
Space in Korea. This is due to the extremely high current
level required. For the Ko Space applications, use power
from the WildBlue modem during dish alignment. Refer to the
section on page 2 of the related application note titled
“Without the Applied Instruments Blue Bunny Voltage
Converter Box” for detailed instructions.
The Blue Bunny Voltage Step Up
can be used with the Super Buddy and Sat Buddy line (Sat
Buddy, Sat Buddy 2, and Dual Buddy) to power the more
popular WildBlue TRIA manufactured by UMA in Taiwan.
Please refer to the tag on the
bottom of your TRIA to see if it’s compatible with the Blue
Bunny Voltage Step Up. If it says “Made in Taiwan by UMA”,
then it is compatible. If it says “Made in Korea by Ko
Space”, then it is NOT compatible.
![[ Blue Bunny ]](../../Order/bluebunnyspecp_small.jpg)
