Products Home

 SATELLITE BUNDLES

 OTHER PRODUCTS

 Channels List

English

عربي

 Customer Service

Home > Switches > Multi Switches (For DirecTV and FTA systems)

DiSEqC & 22KHz Switches

Connect up to two dishes to one receiver. Good for C / KU band dishes.

Connect up to two dishes to one receiver. Includes outdoor weather proof case. Good for C / KU band dishes.

New Model DS41 4x1 DiSEqC Switch

Connect up to four dishes to one receiver. Good for C / KU band dishes.

Connect up to four dishes to one receiver. Good for C / KU band dishes. Includes outdoor weather proof case.

S-DS41C 4x1 DiSEqC Switch with Weatherproof case

Connect up to four dishes to one receiver. Good for C / KU band dishes. Includes outdoor weather proof case.

S-SM21H 2x1 0/22KHz Switch

Connect up to Two dishes to one receiver. Good for C / KU band dishes. Do not use it with a UNIVERSAL lnbf.

JVI 35-TRDTG22 2x2 Dual Band 22KHz Generator

• 1 dB Insertion Loss
• 10 dB Input Return Loss
• 500 mA Maximum Current
• Tone Frequency: 22 kHz ± 10% Square Wave
• 15 mA Current Consumption
• Manual On/Off
• F-female Connector connection points
• 950-2150 MHz Frequency Range

S-SM21V 2x1  0/12V Switch

Connect up to Two dishes to one receiver. Good for C / KU band dishes. Requires 0/12V power supply (usually available on some receiver). Regular price $15

Multi-Switches

Sadoun S-SM34 3x4 Multiswitch

Works with all DBS, DSS and DVB FTA systems. VHF/UHF TV antenna mixing, Up to 4 satellite receivers can independently select different satellite channels, Non-powered.  This switch supplies LNB power from the satellite receiver and do NOT require a power supply.

JVI 35-DTV34 3x4 Mini Multiswitch

Works with all DBS, DSS and DVB FTA systems. VHF/UHF TV antenna mixing, Up to 4 satellite receivers can independently select different satellite channels, Non-powered.  This switch supplies LNB power from the satellite receiver and do NOT require a power supply.

Channel Master 6244P 3x4 Multiswitch

Works with all DBS, DSS and DVB FTA systems. VHF/UHF TV antenna mixing, Up to 4 satellite receivers can independently select different satellite channels, Non-powered.  At least one satellite receiver must be connected to it to pass VHF/UHF signals.

Works with all DBS, DSS and DVB FTA systems. These units are MultiSwitch taps designed for cascade use in dual polarization, tapped trunk distribution systems. Each of the tap outputs can select either thru trunk signal depending upon voltage present on the customer cable. 0 to +14V selects one trunk, whereas +16 to +21V selects the other.

• 3x4 Multiswitch

• Loop-through matrix for extension with 4 connections each

• Highly cascadable

JVI 35-DTV38 MINI 3x8 Multiswitch

Works with all DSS and DVB FTA systems. VHF/UHF TV antenna mixing, Up to 8 satellite receivers can independently select different satellite channels, Non-powered.  This switch supplies LNB power from the satellite receiver and do NOT require a power supply.

Sadoun S-SM38 3x8 Multiswitch

Works with all DSS and DVB FTA systems. VHF/UHF TV antenna mixing, Up to 8 satellite receivers can independently select different satellite channels, Non-powered.  This switch supplies LNB power from the satellite receiver and do NOT require a power supply.

5x2 S-4120-GX Eagle Aspen Multi Switch

High quality equipment for commercial MDU or Home Theater applications. Power passing on all sides for the switching and LNB operation. Generates Dual 22 KHz tone for any tone compatible equipment that needs it. Allows you to connect 2 separate dishes with dual output LNBFs each to 2 separate receivers. RF input for Off Air Antenna.

Zinwell 4x4  Multiswitch SAM4402-3A Works with all DBS, DSS and DVB FTA systems. Use this device to hook up 4 receivers to a 2 satellite dish (with 4 coax connections) or to 2 dual-LNB dishes where each dish is pointed at a separate satellite.