Specifications:
Power supply:1-phase 110V 60HZ P
Power: 1KW
PP Strap width capacity: 9 - 14.5 mm
Thickness:0.5 - 1mm
Max strapping force: 60kg (adjustable)
Arch Width Clearance: 850 mm ( 33.4" )
Arch Height Clearance:1000 mm ( 39.3" )
Speed: 2.2 seconds / line
Unique aluminum-alloy rack
Oiling is not required.
Operations Manual included
Foot pedal included
PP Strapping not included
High Quality Machine
Notes
MACHINE IS OPEN BOX. OPENED FOR PICTURES
AND TESTING ONLY. SOLD AS IS WHERE IS - NO WARRANTY
IMPLIED OR EXPLICIT
We ship this machine anywhere in the USA via truck from our Hilliard, OH warehouse. The shipping freight calculated in the shopping cart is an estimate. Upon submitting your order, we will check the freight rate with the carrier and confirm with you prior to shipping. If you need a freight quote in advance, please
click here to email us your zip code, city and state.
- These machines are intended
for level surface use. Do not use on inclined surfaces
- Use Indoor only
- OSHA Compliance Operator
Training is required to safely operate this equipment.
- Always perform pre-start
inspection. These can cover controls, safety devices, machine components,
and warning signs and decals.
- Operators must perform
required pre-start inspections of the machine, as well as the workplace, in
order to avoid possible unsafe conditions.
- Operators must ensure the
machine is handled within the limits set by the manufacturer
- The safety of the operator as
well as others depends on the actions of the operator; therefore, the
operator must follow good safety practices accordingly
- All future repairs and
maintenance to be made by a qualified person using equivalent replacement
parts
- Always keep operator's manuals
are on the machine
Safety first
As with any piece of equipment, safety should be the primary concern. Remember
every lift brand is different.
Each operator should familiarize
themselves with that particular machine. If someone is not familiar, they should
always refer to the operating manual provided.
Before each use, visually inspect
the equipment. This inspection should include making sure parts are in proper
working order, checking fluid levels, tire condition, proper tire inflation and
the legibility of safety decals. It is equally important to survey the work area
and adjacent space to gauge ground conditions and any overhead hazards such as
power lines and hanging objects. Operators should also wear a safety harness
while they are operating the machine. Each person who will operate the lift must
understand the proper operation of the machine, its intended use and maintenance
requirements.
Also understand any applicable
aerial lift regulations.
You can find OSHA guidelines at
this site. Information on ANSI
rules is at this site.
